COSIMBAUTO

COSIMBAUTO: Real-Time Co-Simulation for Automotive Simulation-Based Test Benches

COSIMBAUTO aims at investigating co-simulation schemes suitable for soft and hard real-time simulation of multiphysics systems in Hardware/Human-in-the-Loop (HiL) and System-in-the-Loop (SiTL) test benches, with special focus on automotive applications.

COSIM

The project started in 2018, led by the Mechanical Engineering Laboratory (Laboratorio de Ingeniería Mecánica - LIM) at University of A Coruña (Spain). Researchers from Siemens Digital Industries Software (Belgium) and LUT University (Finland) have also collaborated in its tasks.

Contact information

Laboratorio de Ingeniería Mecánica
Escuela Politécnica Superior
Mendizábal s/n, 15403 Ferrol - Spain
[email protected]
[email protected]

Supported by

Publications

The following are open access journal articles that contain relevant project results.

Energy-Based Monitoring and Correction to Enhance the Accuracy and Stability of Explicit Co-Simulation Multibody System Dynamics 55(1-2):103-136, 2022		Multibody-Based Input and State Observers Using Adaptive Extended Kalman Filter Sensors 21(15), paper 5241, 2021		Thermal Parameter and State Estimation for Digital Twins of E-Powertrain Components IEEE Access 9:97384-97400, 2021
On the Co-Simulation of Multibody Systems and Hydraulic Dynamics Multibody System Dynamics 50(2):143-167, 2020		Assessment of Methods for the Real-Time Simulation of Electronic and Thermal Circuits Energies 13(6), paper 1354, 2020		An Automated Methodology to Select Functional Co-Simulation Configurations Multibody System Dynamics 48(1):79-103, 2020

Besides, the project results have been presented in international conferences:

Evaluation of indicators for the accuracy and stability of explicit co-simulation schemes
B. Rodriguez, A. Zar, B. Sputh, M.A. Naya, F. Gonzalez, R. Pastorino.
COSIM 2021, International Symposium on Co-Simulation and Solver Coupling in Dynamics, online conference, May 2021.
Benchmark problems for co-simulation methods
A. Zar, F. Gonzalez, B. Rodriguez, A. Luaces, M.A. Naya, J. Cuadrado.
COSIM 2021, International Symposium on Co-Simulation and Solver Coupling in Dynamics, online conference, May 2021.
Use of energy indicators in the explicit co-simulation of multibody systems
B. Rodriguez, A. Zar, F. Gonzalez, M. A. Naya, J. Cuadrado.
ASME 16th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC), online conference, Aug. 2020.
Benchmarks for the explicit co-simulation of mechanical and non-mechanical subsystems
J. Rahikainen, F. Gonzalez, M.A. Naya, A. Mikkola, J. Sopanen.
ASME 15th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC), Anaheim, California, USA, Aug. 2019.
A test framework for the co-simulation of electric powertrains and vehicle dynamics
B. Rodriguez, F. Gonzalez, M. A. Naya, J. Cuadrado.
9th ECCOMAS Thematic Conference on Multibody Dynamics, Duisburg, Germany, Jul. 2019.

Resources

Benchmark problems have been defined during the development of this project to enable the systematic comparison of different co-simulation strategies. Matlab implementations of these examples will be available at the cosim-benchmarks github repository.

Linear Oscillator

2-dof hydraulic manipulator

Moreover, an introduction to co-simulation document has been generated to provide basic concepts on the topic and related bibliography to grad students.

Co-simulation notes